The Stainless Steel overmount kitchen sink is a single-bowl stainless steel sink designed for countertop installation.
The Stainless Steel Overmount Kitchen Sink is made of 304 stainless steel with a chromium content of approximately 18% and a nickel content of approximately 8%. The standard thickness of 18-gauge plate is approximately 1.2mm, and it can be upgraded to a thicker 16-gauge plate approximately 1.5mm thick for enhanced dent and impact resistance. The surface has a longitudinal brushing hardness of approximately 3H and is salt spray resistant for 96 hours, maintaining its gloss. The entire basin is punched and drawn in one go without welding, and its single-point load capacity is no less than 45kg, allowing even heavy cast iron pots to remain intact even after cleaning.
The top-mount flange is approximately 25mm wide, with a folded edge height of approximately 3.5mm, providing ample circumferential rigidity. The Stainless Steel Overmount Kitchen Sink comes with eight to ten stainless steel elastic clips and a full-circle silicone sealing strip, suitable for countertops with a thickness of 20 to 40mm. Once tightened, it forms a continuous seal, preventing water from seeping into the base material and preventing the edges from warping over time.
The recommended exterior dimensions of the stainless steel overmount kitchen sink are 762 x 559 mm, corresponding to an opening of 737 x 533 mm. The inner chamber measures approximately 710 x 430 x 230 mm, with an equivalent capacity of approximately 65 liters. The base features a slight slope of 1/8" and radial diversion ribs, allowing water to flow quickly to the center for drainage. Baking trays and high-sided woks can be placed flat for soaking.
The outer surface of the stainless steel overmount kitchen sink is fully covered with a 3mm composite sound-absorbing pad, with a coverage rate of at least 80%, significantly reducing the sound of falling water and metal-to-metal collisions. The bottom is sprayed with a 0.5mm anti-condensation coating to suppress condensation during cold water use and protect the wooden cabinet from moisture. An EVA cushioning strip is added at the contact point with the countertop, allowing nighttime cleaning without disturbing neighbors.
The inner chamber of the stainless steel overmount kitchen sink features a dense straight brushed finish with R10 rounded corners, ensuring a residue-free cleaning process. The surface is fingerprint-resistant, and even after repeated wiping with a neutral detergent for a thousand times, the color difference between oil and coffee stains is minimal. The drain assembly is a universal 114mm size with a stainless steel basket and a minimum water seal height of 50mm, ensuring more stable odor control.
The stainless steel overmount kitchen sink utilizes internationally compatible dimensions and comes with 40mm and 50mm adapters for direct connection to floor and wall drains. It defaults to a single 35mm faucet hole, with two punched holes along the countertop for on-site expansion of a soap dispenser and water purification faucet. It connects directly to mainstream garbage disposals without changing the piping route.
Daytime morning and evening, it allows for centralized rinsing of lunch boxes and travel cups. The 762 x 559mm stainless steel overmount kitchen sink provides ample storage without occupying aisles. The anti-condensation coating protects the cabinet from moisture, allowing for quick cleaning with a neutral detergent during concentrated shifts. Equipped with a single-hole faucet and a single-hole soap dispenser, the water bar is easy to maintain cleanliness over time.
The space behind the bar is compact, and the 710 x 430 x 230 mm stainless steel overmount kitchen sink can fully immerse a milk jug and filter cup. The fine brushed finish and R10 rounded corners reduce grease buildup, allowing for final cleaning within ten minutes after closing. The drain is compatible with a garbage disposal for smoother liquid-slurry separation, preventing congestion during peak hours.
The lightweight composite board countertops are securely fastened with clips, preventing vibration during travel. The anti-condensation coating reduces the risk of moisture on the floor, and after rainy days, the rear compartment can be opened for ventilation to restore the water to dryness. On-site hoses and power supply connections are readily available, and when leaving the premises, simply disconnect the connections, meeting the high traffic volume of the market.
The apartments emphasize durability and ease of maintenance. The stainless steel overmount kitchen sink reduces the number of fittings, concentrating maintenance points above the countertop. Dormitory management inspections only require verifying the tightness of the clips and the integrity of the sealing strip. The brushed finish resists fingerprints and can be restored with a mild detergent, maintaining a uniform appearance and maintaining a neat appearance between semesters.
On the day of move-in, centralized cleaning is performed to complete the inspection by checking the tightness of the clips and the fit of the sealing strip. The brushed stainless steel overmount kitchen sink is fingerprint-resistant, with R10 rounded corners for a clean, unobstructed view. The drain assembly is quick to disassemble and clean, and the water seal is highly stable and odor-resistant. Room status can be changed quickly, significantly reducing vacancy periods.
Previous: 29 Inch Top Mount Kitchen Sink
