The Single Bowl Top Mount Sink is made of food-grade stainless steel, with standard faucet holes and drain level visible on the countertop side. A matching seal and clips secure the sink from top to bottom, creating a clean, sleek design suitable for both quartz and wood countertops.
The entire sink is constructed from 304 stainless steel, with a chromium content of approximately 18% and a nickel content of approximately 8%. The standard thickness of 18-gauge plate is approximately 1.2mm, with a reinforced version of 16-gauge plate approximately 1.5mm available. The surface has a brushed hardness of approximately 3H and is salt spray resistant for 72 hours without tarnishing. The entire sink is punched and drawn in one piece without welds, and has a single-point load capacity of no less than 40kg.
The recommended external dimensions are 680 x 480mm, corresponding to an opening of approximately 620 x 440mm. The effective inner tank measures approximately 610 x 420 x 220mm, with an equivalent capacity of approximately 56 liters. The inner wall features a slight slope of 1.5 to 2 degrees to direct water to the central drain.
The exterior is extensively covered with 3mm composite sound-absorbing padding, achieving a coverage rate of at least 70%, significantly dampening the sound of drops and collisions. The bottom is sprayed with a 0.4mm anti-condensation coating, which reduces moisture in cold water operation and prevents mold and mildew over time.
The interior is finely brushed with R10 rounded corners, leaving no residue. Even after 500 wet wipes with a neutral detergent, the color difference is less than one point, and oil and coffee stains are easily removed. The surface is highly fingerprint-resistant and maintains uniform reflection even under kitchen lighting.
The flange is approximately 25mm wide, with a reversed folded edge for increased circumferential rigidity. The Single Bowl Top Mount Sink comes with a full-circle silicone seal and eight stainless steel clips, suitable for countertop thicknesses from 20 to 40mm. After sinking, press it inward from under the countertop to prevent water from seeping into the countertop.
The drain is an internationally standard 114mm, suitable for direct connection to a garbage disposal or a basket drain. A 40-50mm adapter and S-shaped tubing are included, allowing for quick connection to common floor and wall outlets.
The Single Bowl Top Mount Sink comes standard with a paper cutting template and a ruler, allowing carpenters to drill along the lines. A single hole is reserved for the faucet position, with a center diameter of 35mm, allowing for a soap dispenser or water purifier to be installed above the countertop. It fits comfortably in 30-inch base cabinets, allowing installation with a clear undercounter width of 680mm.
Existing kitchens are replaced with a single bowl top mount sink and faucet, with the goal of reducing noise and minimizing renovation. The installer arrives with a template, measures the area, and then positions and cuts the holes in the existing countertop. The installation process takes just over ten minutes, including the slotting and snap-on countertop pressure relief. The sealing strip is then applied along the flange, allowing the waterline to connect directly to the existing P-trap. The deep single bowl cavity accommodates large woks and baking pans, making cleaning easier and maintaining a clean appearance during tenant transitions.
Space behind the bar is limited, and the 680 x 480 mm design provides ample storage without obstructing aisles. Milk jugs and pour-over kettles are rinsed and placed in a drain on the countertop. The sound-absorbing layer allows for overnight product washing without disturbing customers in the front area. The single-bowl top-mount sink and countertop are finished within ten minutes of closing, eliminating the need for repeated deep cleaning before resuming operations the next day.
Lightweight composite board countertops are often used in vehicle modifications. The clips on the countertop securely attach to thinner panels, preventing them from loosening due to vehicle vibrations. The anti-condensation coating reduces the chance of moisture on the floor, allowing the rear compartment to be opened for ventilation after rainy days to restore the floor to dryness. On-site evacuation requires only unplugging the hose and power cord, leaving the single-bowl top-mount sink in place, making it ideal for the fast pace of markets and exhibitions.
Teacher apartments are designed for durability and ease of maintenance. The single-bowl top-mount sink layout reduces the number of drain components, concentrating maintenance points above the countertop. Dormitory managers only need to check the drain and faucet mounting during mid-semester inspections. Students rotate frequently during internships, and the brushed surface is fingerprint-resistant and can be restored to a uniform appearance with a mild detergent, meeting the university's standards for utility management.
Home improvement stores often offer in-stock installation services. The single-bowl top-mount sink design is suitable for immediate purchase and installation. Installers carry templates and hole saws, allowing them to cut holes and cut grooves on the same day. Universal 114mm
